Stealth Butyl Force – Super-Concentrated Heavy Equipment Degreaser, 1-Gallon Jug

Stealth Butyl Force | 1-Gallon Super-Concentrated Heavy Equipment Degreaser

Stealth Butyl Force is a super-concentrated butyl + caustic degreaser built to tear through the nastiest grease, oil, and grime on heavy equipment and industrial machinery. This is the go-to chemical for pressure washing pros who clean dozers, cranes, lifts, rigs, and commercial fleets.

Formulated for use with hot water and steam systems, Butyl Force hits hard, rinses clean, and cuts deep—no brushing required. Distributors stretch one drum into three, but end users still get full-strength performance. If you're cleaning big iron, this is your heavy hitter.

This chemical is industrial-grade and should be diluted heavily before use. 

Use it on:

Heavy equipment

Construction machinery

Grease-stained shop floors

Steam cleaning rigs

Industrial vehicles and tools

Save more when you buy by the case—perfect for high-volume pros who don’t want to run out on the job.

• Super-Concentrated Formula
  Highly potent solution can be diluted up to 1:50 with water depending on job severity and application.

• Butyl + Caustic Chemistry
  Combines strong caustics with powerful butyl-based surfactants for fast-acting grime and grease breakdown.

• Made for Heavy Equipment
  Ideal for cleaning bulldozers, cranes, draglines, excavators, loaders, and other off-road or commercial-grade machinery.

• Hot Water Compatible
  Rinses clean in hot or cold water, but delivers peak performance through heated pressure washing systems.

• Corrosion Inhibitors Included
  Formulated with rust-prevention additives and water softeners to protect heating coils and metal surfaces.

• No Phosphates
  Environmentally conscious formula—no phosphate-based ingredients

How to Use

Important: This product is highly concentrated and must be diluted before use.

General Dilution Guidelines:
Mix 1 to 5 parts Stealth Butyl Force with 50 parts water depending on the severity of the job. Always test on a small, inconspicuous area before full application.

For Pressure Washing Use:

1. Drop detergent feed line into undiluted concentrate.

2. Set metering valve to desired dilution.

3. Apply solution from bottom up.

4. Detail clean from bottom up.

5. Rinse from top down with clean water.

Best Practices:

• For steam cleaning and high-heat pressure washers, ensure the product is diluted properly to prevent damage or foaming.

• Rinse thoroughly to prevent residue.

• Avoid prolonged contact with aluminum or polished surfaces

Call us for warranty information: 561-964-3228